Weider 831.159360 Manuel d'utilisateur télécharger pdf (Page 17)

41. Press a 1 1/2” Square Inner Cap (32) into the

Front Seat Frame (36).

Insert the 1/4” x 2 1/4” Carriage Bolt (38) into

the center hole in a Seat Plate (37). Attach

the Seat Plate to the Seat (13) with two 1/4” x

1/2” Screws (18).

Insert the 1/4” x 2 1/4” Carriage Bolt (38) into

the indicated hole in the Front Seat Frame

(36). Tighten a 1/4” Nylon Locknut (2) with a

1/4” Flat Washer (10) onto the Carriage Bolt.

Attach the other end of the Seat (13) to the

Front Seat Frame (36) with a 1/4” Flat Washer

(10) and the 1/4” x 2” Screw (24).

42. Press a 1 1/2” Square Inner Cap (32) into the

Leg Lever (29).

Lubricate the 5/16” x 2 1/4” Bolt (33). Attach

the Leg Lever (29) to the Seat Frame (36)

with the 5/16” x 2 1/4” Bolt and a 5/16” Nylon

Locknut (3). Do not overtighten the Nylon

Locknut. The Leg Lever must be able to

pivot freely.

Insert the 5/16” x 2” Eyebolt (35) into the Leg

Lever (29) from the direction shown. Tighten a

5/16” Nylon Locknut (3) with a 5/16” Flat

Washer (8) onto the Eyebolt.

43. Rest the Front Seat Frame (36) on the indicat-

ed pin in the Front Upright (42). Attach the

Front Seat Frame to the Front Upright with a

5/16” x 2 3/4” Carriage Bolt (14) and the Seat

Knob (40).

SEAT ASSEMBLY

Lubricate—33

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 28 29

Pas de commentaire

Weider 831.159360 Manuel d'utilisateur Page 17