Weider 15CT Manuel d'utilisateur télécharger pdf (Page 10)

14. Locate the Long “U”-Bracket (57) that is pre-

assembled with a 90mm Pulley (15) and a Cable

Trap (not shown). Route the Long Cable (58)

around the Pulley and through the Long “U”-

Bracket. Be sure that the Cable is in the

groove of the Pulley, that the Cable Trap is

turned to hold the Cable in place, and that the

Cable and Pulley move smoothly.

15. Route the Long Cable (58) around a 90mm Pulley

(15). Using an M10 x 45mm Bolt (12) and an M10

Nylon Locknut (21), secure the Pulley to the indi-

cated bracket on the Top Frame (55). Be sure

that the Cable is in the groove of the Pulley

and that the Cable and Pulley move smoothly.

Bracket

16. Attach the Long Cable (58) to the Weight

Carriage (19) with an M10 x 20mm Bolt (69) and

an M10 Nylon Locknut (21). Make sure that the

Bolt and the Nylon Locknut are tight.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 26 27

Pas de commentaire

Weider 15CT Manuel d'utilisateur Page 10